Bearing diagnostic management

In order to maintain the performance of the rolling bearing, it can maintain long-term use under good conditions, and the bearing must be inspected and maintained. This kind of inspection and maintenance (see the attached bearing storage before the bearing is installed), it is very good for preventing failure in advance. Importantly, it is desirable to carry out regular inspections and maintenance according to the operating standards that are suitable for the operating conditions of the machine. Generally, the following methods are used: 3.1 Inspection under operating conditions According to the rolling sound, vibration, temperature inspection of the bearing and the nature of the lubricant, the lubricant is checked. The time of supplement or replacement is judged. For details, see item 4: In-service inspection and troubleshooting. 3.2 Bearing inspection Fully observe the periodic inspection and replacement of the machine and remove the bearing. Check the condition of the raceway surface and whether it can be used again. For details, please refer to item 5: Inspection of the bearing.